AE-XM24CR (serv.man15). Disassembly procedure - Sharp Air Conditioner Service Manual (repair manual). Page 8

66

DUST  SENSOR

GAS  SENSOR

THERMISTOR

CN101 and CN102

5. Remove 2 connectors.
< AY-XPM7CR/9CR/12CR only >

6. Pull the board.

1. Remove 3 screws fixing motors.

2. Turn the cap area of the drain hose counterclockwise,

and remove it from the drain pan.
During installation, turn the drain hose to the state of
the “engagement position”.
After reinstallation, verify that it is securely fastened.

How to remove the horizontal louver
Slightly pull down the hinge area, deflect the louver, and
unhook it from the hinge. Remove the shaft from each of
the left and right sides.

Drain pan

Drain Hose

Groove

Projection

To disconned

To reconnect

1. Remove  the HIGH VOLTAGE UNIT.

(Press and spread the hook, and HI VOLTAGE will be
ready for removal.)

Remove the DUST SENSOR, the THERMISTOR, and the
GAS SENSOR.
(Press and spread the hook,and GAS SENSOR  will be
ready for removal)

display  board  unit2

1

2

The display board unit 2 is pushed in the direction of arrow
   1   .
And it is made to slide in the direction of arrow   2   , and
remove.