Read Panasonic TY-ST42PT1E / TY-ST42PT1U / TY-ST42PW1E / TY-ST42PW1U / TY-ST42PF1E / TY-ST42PF1U / TY-WK42PV1E / TY-WK42PV1U / TY-WK42PR1E / TY-WK42PR1U Other Service Manuals online
4-
4
2
Insert and fasten a M6 screw bolt into the center-top hole.
3
Use a level gauge to correct the alignment of the wall-hanging bracket,
and screw bolts into the remaining five holes.
and screw bolts into the remaining five holes.
4
Provisionally tighten the fixing screws.
Fixing the insulating spacers to the display
unit
unit
1
Spread a clean cloth over a level floor or base, and place on it the dis-
play unit face down.
play unit face down.
Remove the four screws from the display.
2
Use the accessory tool "Allen key" to install the four accessory
,
and
into the holes.
If required, use
commercially available M6
bolts which suit the wall
materials.
commercially available M6
bolts which suit the wall
materials.
If the Screws protrude
more than 5 mm, it will
not be possible to install
the Wide Plasma Display
in the correct position.
more than 5 mm, it will
not be possible to install
the Wide Plasma Display
in the correct position.
Place the display unit face
down on top of a cloth
clean and free from other
foregin particles, and then
proceed to the next step.
down on top of a cloth
clean and free from other
foregin particles, and then
proceed to the next step.
Pan head bolt with
hex socket
hex socket
Toothed pan washer
Insulating spacer
Click on the first or last page to see other TY-ST42PT1E / TY-ST42PT1U / TY-ST42PW1E / TY-ST42PW1U / TY-ST42PF1E / TY-ST42PF1U / TY-WK42PV1E / TY-WK42PV1U / TY-WK42PR1E / TY-WK42PR1U service manuals if exist.