Read Panasonic TX-21PS70TQ Service Manual online
1.3 Leakage Current Hot Check (Fig. 1)
TOP
PREVIOUS
NEXT
1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check.
2. Check a 2 k
Ω
non-inductive resistor and an AC/DC current meter, in series with each exposed
metallic part on the receiver in turn and an earth such as a water pipe.
The current from any point should not exceed 0.7 mA peak AC or 2 mA DC. In the case of a
measurement being outside of these limits specified, there is a possibility of a shock hazard and
the receiver should be repaired and rechecked before it is returnedto the customer.
measurement being outside of these limits specified, there is a possibility of a shock hazard and
the receiver should be repaired and rechecked before it is returnedto the customer.
Fig. 1
,
TOP
PREVIOUS
NEXT
Click on the first or last page to see other TX-21PS70TQ service manuals if exist.