Read Panasonic TX-21PS70TQ Service Manual online
1.4 X-Radiation
TOP
PREVIOUS
NEXT
Warning:
The potential sources of X-Radiation in TV set are the EHT section and the picture tube. When using a
picture tube test jig for service, ensure that jig is capable of handling
picture tube test jig for service, ensure that jig is capable of handling
29.0kV
without causing X-
Radiation.
Note:
It is important to use an accurate periodically calibrated high voltage meter.
1. Set the brightness to minimum.
2. Use the remocon to get into Service Mode.
3. Measure the EHT. The meter reading should indicate
27.5±1.5kV
. If the meter indication is out
of tolerance, immediate service and correction is required to prevent the possibility of premature
component failure.
component failure.
4. To prevent the possibility X-Radiation, it is essential to use the specified picture tube, if service
replacement becomes necessary.
TOP
PREVIOUS
NEXT
Click on the first or last page to see other TX-21PS70TQ service manuals if exist.