TC-51P100G, TC-51P100H - Panasonic TV Service Manual (repair manual). Page 13

- 13 -

Centering magnet

W1W2

W1=17.5mm ± 2.5mm

W2=40.0mm ± 2.5mm

DY

R G B

Space : A     2.5mm

A

A

A

A

Center line of Center Mark

Center line of Center Mark

Expand

Expand

Center Mark

Center Mark

1. Receive a monoscope pattern.
2. Confirm that static convergence data (MARKET MODE CHK5) for R,G and B is 0.
3. Set that Point convergence data (MARKET MODE CHK5) is clear (no correction).
4. Set that V-Center data (MARKET MODE CHK5) is [60].
5. Set that H-Center data (MARKET MODE CHK5) is [35].
6. Set that H-Parallel data (MARKET MODE CHK5) is [32].

Procedure:

1. Cover the Red, Blue CRT lens, projecting Green only.
2. Adjust green horizontal deflection coil if the projected green horizontal line does

not line up with the screen horizontal center line.

3. Cover the Green, Red CRT lens, projecting Blue only.
4. Repeat step 2. for blue.
5. Cover the Green, Blue CRT lens, projecting Red only.
6. Repeat step 2. for red.
7. Cover the Red, Blue CRT lens, projecting Green only.
8. Adjust green centering magnets until the center of the monoscope pattern line

up with the screen center line.

9. Cover the Green, Red CRT lens, projecting Blue only.
10. Adjust blue centering magnets to position the center of the blue raster

W2=40.0mm±2.5mm away from the center of the green raster.

11. Cover the Green, Blue CRT lens, projecting Red only.
12. Adjust red centering magnets to position the center of the red raster

W1=17.5mm±2.5mm away from the center of the green raster.