KX-TS85GB, KX-TS85GW - Panasonic Telephone Service Manual (repair manual). Page 5

•|

5

•|

You can select the dialing mode by programming. If you have touch
tone service, set to TONE. If rotary or pulse service is used, set to
PULSE. Your phone comes from the factory set to TONE.

You can make a call by simply lifting the handset. To hang up, place
the handset on the cradle.

Press 

 firmly, until the indicator lights.

Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will show

the length of the call.

• If you misdial, hang up and start from step 1.

When the other party answers,
talk into the MIC (microphone).

To hang up, press 

 .

• The indicator light goes out.
• The display will return to the stand-by mode.

To increase, press 

 .

To decrease, press 

 .

• " 

 

" shows the volume level.

• The display will return to the dialed
  number, then the length of the call.
• After hanging up, the handset volume

will return to the middle level.

The redial function allows you to dial the last number you have dialed.

Press 

 

 press 

 .

Lift the handset.

Press 

 .

• " 

 " is displayed.

Press 

 .

To select PULSE, press 

 .

OR
To select TONE, press 

 .

Press 

 .

• A beep sounds on the

handset.

When finished,
replace the handset.

• To cancel during programming, replace the handset, then start

from step 1.

• If 4 beeps sound during programming, a wrong key was pressed.

Replace the handset, then start from step 1.

and Indicator 

Microphone

               ,

Ex. PULSE is selected.

Ex. Speaker volume level: 4

Ex. Handset volume level: 4

During the speakerphone operation:
• For best speakerphone performance, talk alternately with the
caller in a quiet room.
• If the caller complains that your voice is hard to hear, press

 to decrease the speaker volume.

• You can switch to the handset by lifting it up. To switch back to

the speakerphone, press 

 .