Read Panasonic KX-TCD965RUC Service Manual Simplified online
•|
4
•|
KX-TCD965RUC
(Model KX-TCD965RUC)
3. Send batch file “SET FREQ nn” to set the clock frequency. The default value of nn is 80. Increase the value to
increase the frequency. The clock frequency must be 10,368.000 kHz ± 0.04 kHz.
increase the frequency. The clock frequency must be 10,368.000 kHz ± 0.04 kHz.
•¡
CHECK PROCEDURE [HANDSET] (Change from original page 48)
TEST EQUIPMENT REQUIRED AND EQUIPMENT SETUP
Connect a 3.9V supply to the board J5 (+), J8 (–).
INITIAL POWER + BBIC TESTS
4. Check the 3.0V supply voltage (TP10). It must be 2.85 +/– 0.3V.
5. Connect RFCLK (TP56) to CH.1 on the scope. Send batch file RFCLK1.
6. Check if the clock waveform is 10,368.000 kHz,+/– 40Hz.
7. Send batch file “SELF TEST”. The first 4digits are FLASH ROM checksum, the next 2 digits are RAM test,
and must be 00
5. Connect RFCLK (TP56) to CH.1 on the scope. Send batch file RFCLK1.
6. Check if the clock waveform is 10,368.000 kHz,+/– 40Hz.
7. Send batch file “SELF TEST”. The first 4digits are FLASH ROM checksum, the next 2 digits are RAM test,
and must be 00
SET CLOCK FREQUENCY
1. Send batch file “RFCLK1”.
The underlined parts have been changed from the original
The underlined part has been added to the original
• Nickel Cadmium (Ni-Cd) rechargeable batteries (AAA size) are available.
When you replace the batteries, you must program the battery type selection.
When you replace the batteries, you must program the battery type selection.
•¡
Battery Information (Change from original page 7)
•¡
•¡
•¡
•¡
•¡
ACCESSORIES AND PACKING MATERIALS (Change from original page 62)
P5
Addition
Click on the first or last page to see other KX-TCD965RUC service manuals if exist.