KX-TCD965GC - Panasonic Telephone Service Manual (repair manual). Page 12

Read Panasonic KX-TCD965GC Service Manual online

12
KX-TCD965GC
1 Press 
F
.
2 Press   or   until the arrow points to "
Program
", then press OK  .
3 Press   or   until the arrow points to "
Setting Handset
", then press OK  .
4 Press   or   until the arrow points to "
Ringer Volume
", then press OK  .
 
The current volume is displayed and rings.
5 Press   or   to select the desired level.
 
Each time you press a button, the selected volume is displayed and rings.
 
To set to OFF, erase "    " by pressing   until "
OFF
" is displayed.
6 Press OK .
 
A confirmation tone sounds.
 
The display will return to "
Ringer Volume
". To return to the stand-by mode, press 
C
 or wait for 60 seconds.
 
When set to OFF, "
Ringer Off
" will be displayed.
SELECTING THE HANDSET RINGER VOLUME
You can program the desired handset ringer volume. Make sure that the power is on and the unit is in the stand-by mode.
6 levels are available. The lowest level is 1. The highest level is 6. The factory preset is 3. When set to OFF, the handset will
not ring.
SELECTING THE BASE UNIT RINGER VOLUME
3 levels (HIGH, MEDIUM, LOW) are available. The factory preset is MEDIUM. When set to OFF, the base unit will not ring.
Make sure that the power is ON and the unit is in the stand-by mode.
1 Press 
F
 .
2 Press   or   until the arrow points to "
Program
", then press OK  .
3 Press   or   until the arrow points to "
Setting Base
", then press OK  .
 
"
Input Command
" is displayed.
4 Press 
2
 TWICE.
 
The current volume is displayed.
1: LOW   2: MEDIUM   3: HIGH   0: OFF
5 Press the desired volume level 
1
 , 
2
 , 
3
 or 
0
.
 
Each time you press a button, the selected volume is displayed and rings.
6 Press OK  .
 
A confirmation tone sounds.
 
The display will return to "
Setting Base
". To return to the stand-by mode, press 
C
 or wait for 60 seconds.
 Ringer Volume
   -          +
Page of 68
Display

Click on the first or last page to see other KX-TCD965GC service manuals if exist.