Read Panasonic KX-TCD965GC Service Manual online
8
KX-TCD965GC
USING THE BELT CLIP
You can hang the handset on your belt or pocket using the belt clip.
To remove the belt clip
SELECTING THE DIALING MODE
You can program the dialling mode to tone or pulse. If you have touch tone service, set to tone. If rotary or pulse service is
used, set to pulse. The factory preset is tone.
Make sure that the power is ON and the unit is in the stand-by mode.
used, set to pulse. The factory preset is tone.
Make sure that the power is ON and the unit is in the stand-by mode.
Fig. 14
Fig. 15
1
Press
F
.
2
Press
or
until the arrow points to “
Program
”.
3
Press OK
.
4
Press
or
until the arrow points to “
Setting Base
”.
5
Press OK
.
• “
Input Command
” is displayed.
6
Press
3
.
7
Enter the base unit password.
• The factory preset is 0000.
8
Press
1
.
• The current mode is displayed.
1: Tone
2: Pulse
Ex. Tone is selected.
9
To select Pulse, press
2
.
OR
To select Tone, press
To select Tone, press
1
.
10
Press OK
.
• A confirmation tone sounds.
• The display will return to “
• The display will return to “
Setting Base
”.
To return to the stand-by mode, press
C
or wait
for 60 seconds.
• If 5 beeps sound in step 7, the entered password is
incorrect. Enter the correct password.
• You can exit the programming mode any time by
pressing
C
.
Input Command
3 ----
Input Command
31 1
Click on the first or last page to see other KX-TCD965GC service manuals if exist.