Read Panasonic KX-TCD961GB Service Manual online
KX-TCD961GB
14
Programming Summary for the Answering System
You can program function items using the handset near the base unit. See the corresponding pages for function details.
Make sure that the power is ON and the unit is in the stand-by mode.
<Stand-by mode>
•
If " " flashes on the handset display and an alarm tone sounds, move closer to the base unit and try again.
•
To return to the previous step during programming press .
•
When programming is completed, a confirmation tone sounds.*
•
To cancel during programming, press . Start again from the beginning.
•
If 6 beeps sound on the base unit during programming, a wrong key was pressed. Enter the correct number.
*What the confirmation tone means
1 beep:
1 beep:
The new programmed setting or selection is done.
2 beeps: The setting or selection is the same as the previous one.
6 beeps: The setting or selection is not correct. Try again from the beginning.
6 beeps: The setting or selection is not correct. Try again from the beginning.
C
Press then
.
INT
Enter a desired function command as shown below.
Command
0
1
2
3
Function item
To adjust the time and day
To set the remote code
To select the number of rings
To select the caller's recording time
Command
4
Function item
To set the greeting monitor
function
function
Press .
Click on the first or last page to see other KX-TCD961GB service manuals if exist.