Read Panasonic KX-TCD961GB Service Manual online
9
KX-TCD961GB
OPERATION
MAKING CALLS
TURNING THE POWER ON
Press
firmly.
• After all possible configurations briefly appear, the display will change to the following. Then the handset is in the
stand-by mode.
The current connected base unit number is displayed.
• You can choose whether to display the base unit number, handset number or no display in the stand-by mode by
programming.
programming.
To turn the power OFF, press and hold
until a beep sounds.
• The display will go blank.
• The handset will not ring.
• The handset will not ring.
• Depending on the programming mode, you may not be able to turn the power off. First make sure the handset is set to the
stand-by mode.
Make sure that the power is ON.
1
Press
.
•
"
" is displayed.
2
Dial a phone number.
• The dialed number is displayed.
3
To hang up, press
or place the handset on the base unit.
•
The handset will return to the stand-by mode.
•
After a few seconds, the display will start showing the length of the call.
Click on the first or last page to see other KX-TCD961GB service manuals if exist.