KX-TCD951GB, KX-TCD955GC - Panasonic Telephone Service Manual (repair manual). Page 55

55

000D..000D

9B

fmin

(min pulse delay between pulses)-(2x10ms) [10ms]
See ChargeDetectSetupType
----------- ETSI requirements -----------
Name 16kHz 12kHz
---------------------- ----- ----- --------------------------------
fmin 155 115 min 15.5 or 11.5 kHz

000E..000E

A5

fmax

(min pulse delay between pulses)-(2x10ms) [10ms]
See ChargeDetectSetupType
----------- ETSI requirements -----------
Name 16kHz 12kHz
---------------------- ----- ----- --------------------------------
fmax 165 125 max 16.5 or 12.5 kHz

000F..000F

03

LineFlags

Bit pattern defining mode of operation of Line interface
Bit 0: 0=pulse, 1=DTMF
Bit 1: 0=earth, 1=flash : DTMF modes
Bit 2: Reserved
Bit 3: Reserved
Bit 4: Reserved
Bit 5: Reserved
Bit 6: Reserved
Bit 7: Reserved

0010..0010

80

BmcInitDataArr_0

BMC Adjustment
Frequency adjust value for crystal (??
Range/Resulution ??)

0011..0011

2E

BmcInitDataArr_1

BMC Adjustment
S_err(0..3),INV_RDI,INV_TDO,SenseA PP/FPn

0012..0012

00

BmcInitDataArr_2

BMC Adjustment
Mask(8..15)

0013..0013

FF

BmcInitDataArr_3

BMC Adjustment
slide mask(8..15)

0014..0014

29

BmcInitDataArr_4

BMC Adjustment
Default comperator value : DAC(0..15)

0015..0015

5F

BmcInitDataArr_5

BMC Adjustment
ADP, WIN(0..3)
14421B 0x1F
14421C 0x5F

0016..0016

41

BmcInitDataArr_6

BMC Adjustment
VOL(0..2),FLT(0..1),M(0..1)

0017..0017

C2

BmcInitDataArr_7

BMC Adjustment
BMC analogue powerup control word

0018..0018

05

BmcInitDataArr_8

BMC Adjustment
Test byte xxxx0000

0019..0019

95

BmcInitDataArr_9

BMC Adjustment
Bit pattern defining the loudspeaker and microphone
gain
Bit pattern defining mode of operation of Line interface
Bit 0: Microphone gain
Bit 1: Microphone gain
Bit 2: Microphone gain
Bit 3: Microphone gain
Bit 4: Loudspeaker gain
Bit 5: Loudspeaker gain
Bit 6: Loudspeaker gain
Bit 7: Loudspeaker gain