Read Panasonic AW-E600E Service Manual online
2
Pin No.
Signal
Pin No.
Signal
1
Return Control
7
Iris Follow
2
Not Used
8
Auto/Remote Control
3
GND
9
Not Used
4
Auto/Manual Control
10
Not Used
5
Iris Control
11
Not Used
6
Lens Power
12
Not Used
<Front View>
Iris Connector (IRIS)
o q
i
w
u
e
y
t
r
!2
!0
!1
10. I/F Remote Connector (I/F REMOTE)
Input terminal dedicated to control signals from the
optional Remote Control Box (RCB) (WV-CB700A) and
the RCU (WV-RC700A, WV-RC550) and the camera
pan/tilt unit (AW-PH300).
optional Remote Control Box (RCB) (WV-CB700A) and
the RCU (WV-RC700A, WV-RC550) and the camera
pan/tilt unit (AW-PH300).
* WV-CB700A is connected through the optional RCB
cable (AW-CA50T10).
* WV-RC700A/WV-RC550 is connected through the
optional RCU cable (AW-CA50A26).
* AW-PH300 is connected through the optional pan/ tilt
unit cable (AW-CA50T15).
11. Power Indicator
Red LED lamp lights to indicate that the specified DC
power is supplied to the camera.
power is supplied to the camera.
7. NO/BAR Switch (NO/BAR/
−
)
The item just below can be selected by pressing this
switch while the Main Menu is on the screen.
While the Sub Menu is displayed any setting can be
brought down to a lower value with this switch. When
the menu is not displayed or the camera is in shooting
mode, the colour bar and the shooting conditions are
alternately indicated by pressing the switch.
switch while the Main Menu is on the screen.
While the Sub Menu is displayed any setting can be
brought down to a lower value with this switch. When
the menu is not displayed or the camera is in shooting
mode, the colour bar and the shooting conditions are
alternately indicated by pressing the switch.
8. Video Output Connector (VIDEO OUT)
A composite video signal is provided at this connector.
9. Iris Connector (IRIS)
Input terminal for lens with an iris control function.
13. Cable Clamp
Clamp the DC Power Supply Cable (AW-CA4T1) con-
nected to the DC 12 V Input Connector to prevent it from
slipping out.
nected to the DC 12 V Input Connector to prevent it from
slipping out.
14. G/L Input Connector (G/L IN)
Signals synchronized with the reference signal are to be
supplied to this connector when the camera is to be syn-
chronized with the reference signal BBS.
supplied to this connector when the camera is to be syn-
chronized with the reference signal BBS.
15. Optional Card Slot
Slot for inserting an optional card. For details, refer to
the manual for optional cards.
the manual for optional cards.
12. DC 12 V Input Connector (DC 12V IN)
12 V DC is supplied through the optional DC power sup-
ply cable (AW-CA4T1).
ply cable (AW-CA4T1).
Click on the first or last page to see other AW-E600E service manuals if exist.