Read Panasonic AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC Service Manual online
INF-4
2. MAINTENANCE
Maintenance is done by periodically performing suitable maintenance servicing in order to maintain the functions
always in the best condition, so that the user can use the equipment safely. Video equipment with mounted
mechanisms uses wear parts, and their wear and deterioration causes troubles. Dust and dirt also can impair
stable operation. For this reason it is important not to just perform repair at the time of trouble, but also to perform
suitable maintenance at regular intervals.
mechanisms uses wear parts, and their wear and deterioration causes troubles. Dust and dirt also can impair
stable operation. For this reason it is important not to just perform repair at the time of trouble, but also to perform
suitable maintenance at regular intervals.
2-1. Maintenance Chart
The following periodic maintenance is required to maintain in good condition
No.
Part Name
Part No.
Cleaning
Replacement
Remark
Tape Transport Part
------
100 hours
------
*1
1
Cylinder Unit
VEG1573
100 hours
Every 1000 hours
2
Pinch Arm Unit
VXL3161
------
Every 1000 hours
3
Cleaning Arm Unit
VXL3103
------
Every 1000 hours
4
Gear Box (Loading Motor Unit)
VXA5417
------
Every 1000 hours
5
REV Brake Unit
VXZ0441
------
Every 1000 hours
6
FF Brake Unit
VXZ0322
------
Every 1000 hours
7
S-Main Brake Unit
VXZ0321
------
Every 1000 hours
8
T-Main Brake Unit
VXZ0319
------
Every 1000 hours
9
Supply Reel Table
VXR0355
------
Every 1000 hours
10 Take-up Reel Table
VXR0356
------
Every 1000 hours
11 Mode Cam SW Unit
VSR0114
------
Every 1000 hours
12 Main Cam Gear
VXA5407
------
Every 1000 hours
13 S1 Boat Unit
VXL3242
------
Every 1000 hours
14 T1 Boat Unit
VXL3243
------
Every 1000 hours
15 Tension Arm Unit
VXL3244
------
Every 1000 hours
16 Pad Arm Unit
VXL2732
------
Every 1000 hours
17 Mechanism Chassis Unit
VXY1801
------
Every 3000 hours
*2
Note:
Using hours are based on the head rotation hours. (HOUR METER can be confirm on item HOUR METER in
OTHER FUNCTION menu.)
Using hours are recommendation. It may depend on temperature, humidity, quality of tape or dust condition.
Using hours are listed as the reference of maintenance. They do not mean guarantee hours.
HOUR METER can be reset by EVR software (Refer to item “5. HOUR METER RESET” in section 4.)
*1 Tape transport parts mean following parts.
(Tension Post, S3 Post, S2 Post, S1 Post, Cylinder & Heads,T1 Post, T2 Post, Capstan Shaft, Pinch Roller and
T3 Post)
T3 Post)
*2 Parts listed from No.1 to 16 are included in Mechanical Chassis Unit. Replacing the Mechanism Chassis Unit is
recommended every 3000 hours.
Click on the first or last page to see other AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC service manuals if exist.