Read Panasonic PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) Service Manual online
ADJ-8
SECTION 3 ADJUSTMENTS
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
(;75$237,21
)5((=(0(66$*(
21
)$1)8//02'(
2))
[S
$872
(08/$7(
%$8'5$7(
%$8'5$7(
9(56,21
0$
,13876(/(&7
6(/)&+(&.
7(673$77(51
)/,&.(5$'-867
02'(/126(77,1*
6(/)&+(&.
7(673$77(51
)/,&.(5$'-867
02'(/126(77,1*
3$1(/7<3(6(77,1*
/
:+,7(%$/$1&($'-867
.(<6721(&$/,%5$7,21
&/2*6(1625&$/,%5$7,21
&/2*6+87'2:121
9$/(16
',*,7$//,1.6(783
5*%3,;(/$'-867
*+267)%&$/,%5$7,21
+'0,(48$/,=(5
6,*1$/6(16,7,9,7<
&/$03326,7,21
7+5(6+2/'6:
:$,781087(P6
.(<6721(&$/,%5$7,21
&/2*6(1625&$/,%5$7,21
&/2*6+87'2:121
9$/(16
',*,7$//,1.6(783
5*%3,;(/$'-867
*+267)%&$/,%5$7,21
+'0,(48$/,=(5
6,*1$/6(16,7,9,7<
&/$03326,7,21
7+5(6+2/'6:
:$,781087(P6
1. 4. Panel type setting
1. 4. 1. Preparation
Before taking this setting, confirm the type of optical block (L-Type
or R-Type) according to the item "Optical block type check" in the
section 1 "Service Information".
1. 4. 2. Setting procedure
1. Enter the service mode (EXTRA OPTION) and select [PANEL
TYPE SETTING].
2. Change the panel type to [L] or [R] with [
] [
] buttons to match
the optical block type which is installed on the projector.
L: L-Type
R: R-Type
• Refer to the item "4.2.5. Optical block type check" in section 1 for
checking the type of the optical block.
(;75$237,21
)5((=(0(66$*(
21
)$1)8//02'(
2))
[S
$872
(08/$7(
%$8'5$7(
%$8'5$7(
9(56,21
0$
,13876(/(&7
6(/)&+(&.
7(673$77(51
6(/)&+(&.
7(673$77(51
)/,&.(5$'-867
02'(/126(77,1*
3$1(/7<3(6(77,1*
3$1(/7<3(6(77,1*
/
:+,7(%$/$1&($'-867
.(<6721(&$/,%5$7,21
&/2*6(1625&$/,%5$7,21
&/2*6+87'2:121
9$/(16
',*,7$//,1.6(783
5*%3,;(/$'-867
*+267)%&$/,%5$7,21
+'0,(48$/,=(5
6,*1$/6(16,7,9,7<
&/$03326,7,21
7+5(6+2/'6:
:$,781087(P6
.(<6721(&$/,%5$7,21
&/2*6(1625&$/,%5$7,21
&/2*6+87'2:121
9$/(16
',*,7$//,1.6(783
5*%3,;(/$'-867
*+267)%&$/,%5$7,21
+'0,(48$/,=(5
6,*1$/6(16,7,9,7<
&/$03326,7,21
7+5(6+2/'6:
:$,781087(P6
1. 5. Flicker adjustment
1. Enter the service mode (EXTRA OPTION) and select [FLICKER
ADJUST] and press [ENTER] button to enter the flicker adjust-
ment mode.
2. The whole red raster pattern will displayed on the screen when
entering the adjustment mode.
3. Adjust the flicker to be minimum with [
] [
] buttons.
4. Change another adjustment pattern with [
p
] [
q
] buttons and
repeat the step 3 above.
Projector provide 3 adjustment patterns "Red", "Green" and "Blue".
5. After finishing the adjustment, press [MENU] button to exit the
adjustment mode.
Click on the first or last page to see other PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) service manuals if exist.