Read Panasonic PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) Service Manual online
ADJ-7
SECTION 3 ADJUSTMENTS
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
1. 3. 4. Restore the data (after board replacing)
1. Set the projector to "Normal-Standby" mode (ON(G)/STANDBY(R) indicator is lighting in red).
2. Start up the service software with a PC.
3. Select language and click the [OK] button.
4. 1) Choose the available serial port number on your PC.
2) Click the [Data] button.
5. 1) Click the [Transmission] button of Micom data.
2) Select the saved data file and the data is restored after click the [ Open(O) ] button.
3) When the progress bar reaches the right-side end, the transmission of data is completion.
4) Restore the Gamma data/Uniformity data in the same procedure of 1-3.
6. After completing the writing, disconnect the AC code and connect it to turn on again and then check the color uniformity
and gamma characteristic of the projector.
: PT-VZ580
j
k
/ Uniformity data
PT-VZ580
AB1234567
j
k
Click on the first or last page to see other PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) service manuals if exist.