Read Panasonic PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) Service Manual online
ADJ-16
SECTION 3 ADJUSTMENTS
<VW360/VX430/VX431K>
2.2. Main firmware update(USB memory)
2.2.1. Projector setting
1. Set the projector to "Normal-standby" mode.( <ON(G)/STANDBY(R) >indicator is blinking in red).
2. Set the [EMULATE] to "DEFAULT" .
2.2.2. USB memory preparation
1. USB memory
Format: FAT32
Capacity: 250MB or more
2. Create a "fwupdate" folder in directory of USB memory.
Example: D:/fwupdate
3. Copy the downloaded firmware updating file "*.bin" to "fwupdate" folder.
Example: D:/fwupdate/VW360_V030.bin
2.2.3. Update procedure
1. Unplug the AC cord to cut off the power.
2. Insert the USB memory with firmware updating file to <USB A VIEWER/WIRELESS> terminal of projector.
USB memory
3. Connect the AC cord and the <ON(G)/STANDBY(R) >indicator blink in red.
4. Press and hold the <MENU> + <AUTO SETUP> + <v
4. Press and hold the <MENU> + <AUTO SETUP> + <v
/b> buttons at the same time for 3 seconds or more until
<LAMP>,<WARNING> indicator lights up.
5. When the update starts, the <ON(G)/STANDBY(R)> indicator blinks in red and <LAMP>,<WARNING> indicator lights up
alternately.
• If the error occurs at updating, <LAMP>、<WARNING> indicator will light all the time.
<ON(G)/STANDBY(R) >indicator will blink in red
• Do not unplug the USB memory device or cut off the power during the firmware updating in case the projector
can not be turned on.
6. <LAMP>,<WARNING> indicator lights up alternately for about 5 minutes until the update is completed.
After the update is completed, the <ON(G)/STANDBY(R) >indicator will continue to blink in red.
If the <LAMP> and <WANING> LEDs do not blinks alternately, rewriting is not being executed.
Please check that the version of the firmware and rewrite firmware data are correct.
Click on the first or last page to see other PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) service manuals if exist.