Read Panasonic PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) Service Manual online
ADJ-14
SECTION 3 ADJUSTMENTS
<VW360/VX430/VX431K>
7. After loading the firmware, a checkmark and path name to the firmware and version information will be displayed on
the window.
Click the [Update] button to start updating of the firmware if all the information is correct.
8. Click [OK] button to start updating if the firmware version is correct.
9. During updating, the message "Now updating....." appears and <LAMP>,<WARNING> LEDs are blinking alternately and
<ON(G)/STANDBY(R) LED is blinking .
After finishing updating, the message "Waiting for Projector reboot..." appears on screen and the projector are set into
standby mode. (All LEDs stop blinking.)
Never disconnect the AC
cord during updating.
When the message " Waiting for Projector reboot " or the popup menu icon disappears and the LEDs do not
blink for about 1 minute, please disconnect the AC cord and plug it again.
The updating of the same version
of firmware will be skipped.
Click on the first or last page to see other PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) service manuals if exist.