Read Panasonic PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) Service Manual online
ADJ-11
SECTION 3 ADJUSTMENTS
<VW360/VX430/VX431K>
2. Firmware Update Procedure
* Firmware update can be done via LAN terminal and serial terminal or USB memory.
2. 1. Main firmware update(Network)
2. 1. 1. Equipment to be used
1. Computer : Use it for transmitting the software data.
2. Communication cable : LAN Cable (when connecting directly, Please use a cross cable )
3. Service tool : Please download the service tool [ Main/Sub/Network/Formatter Update Tool.exe] from the projector service
Web(PASS).
3. Microprocessor firmware : Please download the file from the projector service homepage to your PC.
2. 1. 2. Connection preparation
1. Select the sub menu [NETWORK STATUS] of the main menu
[NETWORK/USB] and check the IP address of the LAN
and take a note.
2. Setup the IP address of computer's network to the same network
group of the projector.
3. Connect the LAN terminal of projector and PC with a LAN cable.
2.1.3. Update procedure
1. Set the projector to "Normal-standby" mode.( <ON(G)/STANDBY(R) >indicator is blinking in red).
2. Start up the service software with a computer.
3. Select the Model No. according to the methods below and click [OK] button.
1) Check [Manual Select] and search the model name by inputting all or part of model name in [keyword].
● Do not set the computer to the standby mode or
shutdown the computer during the updating.
shutdown the computer during the updating.
LAN terminal connection example
LAN cable (straight)
LAN cable (straight)
Projector LAN
Computer
Hub
Click on the first or last page to see other PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) service manuals if exist.