Read Panasonic PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) Service Manual online
ADJ-7
SECTION 3 ADJUSTMENTS
<VW360/VX430/VX431K>
1. 4. Panel type setting
1. 4. 1. Preparation
Before taking this setting, confirm the type of optical block (L-Type or
R-Type) according to the item "Optical block type check" in section 1
"Service Information".
1. 4. 2. Setting procedure
1. Enter the service mode (EXTRA OPTION) and select [PANEL TYPE
SETTING].
2. Change the panel type to [L] or [R] with [
] [
] buttons to match the
optical block type which is installed on the projector.
L: L-Type
R: R-Type
':64#126+10
(4''<'/'55#)'
10
(#0(7../1&'
1((
8)#R
'/7.#6'
$#7&4#6'
8'45+10
+02765'.'%6
5'.(%*'%-
6'562#66'40
(.+%-'4#&,756
/1&'.015'66+0)
6'562#66'40
(.+%-'4#&,756
/1&'.015'66+0)
2#0'.6;2'5'66+0)
.
(#081.6#&,756
+0276#761%#.+$4#6+10
9*+6'$#.#0%'#&,756
#%%'.'4#6+10%#.+$4#6+10
%.1)5'0514%#.+$4#6+10
+0276#761%#.+$4#6+10
9*+6'$#.#0%'#&,756
#%%'.'4#6+10%#.+$4#6+10
%.1)5'0514%#.+$4#6+10
70&'4O
1. 5. Flicker adjustment
1. 5. 1. Adjustment procedure
1. Enter the service mode (EXTRA OPTION) and select [FLICKER
ADJUST] and press [ENTER] button to enter the flicker adjustment
mode.
2. The whole red raster pattern will be displayed on the screen when
entering the adjustment mode.
3. Adjust the flicker to be minimum with [
] [
] buttons.
4. Change to another adjustment pattern with [
] [
] buttons and
repeat the step 3 above.
The projector provides 3 adjustment patterns "Red", "Green"
and "Blue".
5. After finishing the adjustment, press [MENU] button to exit the
adjustment mode.
':64#126+10
(4''<'/'55#)'
10
(#0(7../1&'
1((
8)#R
'/7.#6'
$#7&4#6'
8'45+10
+02765'.'%6
5'.(%*'%-
6'562#66'40
6'562#66'40
(.+%-'4#&,756
/1&'.015'66+0)
2#0'.6;2'5'66+0)
2#0'.6;2'5'66+0)
.
(#081.6#&,756
+0276#761%#.+$4#6+10
9*+6'$#.#0%'#&,756
#%%'.'4#6+10%#.+$4#6+10
%.1)5'0514%#.+$4#6+10
+0276#761%#.+$4#6+10
9*+6'$#.#0%'#&,756
#%%'.'4#6+10%#.+$4#6+10
%.1)5'0514%#.+$4#6+10
70&'4O
● In case of the Optical block replaced:
Confirm that the type of optical block and setting are matched.
● In case of A-PCB replaced:
After transferring the standard or gamma and uniformity data,
Confirm that the type of optical block and setting are matched.
● In case of A-PCB replaced:
After transferring the standard or gamma and uniformity data,
confirm that the type of optical block and setting are matched.
Click on the first or last page to see other PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) service manuals if exist.