Read Panasonic PT-VW340Z / PT-VW340ZD / PT-VX410Z / PT-VX410ZD / PT-VX46EA / PT-VX406EA Service Manual online
INF-12
SECTION 1 SERVICE INFORMATION
(1) – Software version of each microprocessor
MM: Main microprocessor, SM: Sub microprocessor,
(2) – Input signal name
(3) – Input signal frequency (Horizontal / Vertical)
(4) – Temperature error check
(5) – Temperature at sensors (Celsius)
INTK (Intake air) / LAMP (Lamp) / OPTI (Optical module) /
EXST (Exhaust air) / FLTR (Filter clogged)
(6) – Correction value of clogged sensor.
(7) – Fan rotation check
INTK (Intake fan) / LAMP (Lamp fan) / EXST (Exhaust fan)
(8) – Iris error check (NG: error)
(9) – lamp error check (NG: error)
(10) – Lamp memory communication check (NG: error)
(11) – Projector accumulated runtime
(12) – Converted lamp runtime / Lamp on times
Current / 1 time before reset / 2 times before reset
(13) – Projector serial no.
(14) – Version no. of FPGA (for VX415N.VW345N)
(15) – Version no. of emulate software (when selecting other
company). [--] means not set.
(16) – Status of correction data in the memories
G-SAVED: Gamma correction data
U-SAVED: Color shading correction data
(17) – Temperature at sensors (Celsius) when the latest shut-
down occurred by temp error.
INTK (Intake air) / LAMP (Lamp) / OPTI (Optical module) /
EXST (Exhaust air) / FLTR (Filter clogged)
(18) – Status of lamp replacement time
NG: Lamp runtime exceeds 4000H at lamp power high
(19) – Lamp runtime reset times
(20) – Actual lamp runtime
Current / last time reset / 2nd last time reset
8. SELF CHECK
• Displays the self diagnostic information
9. TEST PATTERN
• Displays test patterns of White/Red/Green/Blue raster signals,
- Change the patterns by up down buttons, Change the color by left right buttons.
10. FLICKER ADJUST
• Perform the flicker adjustment
11. MODEL NO. SETTING
• Setting up the model no. of the projector.
12. PANEL TYPE SETTING
• Setting up the LCD panel type (L-Type or R-Type).
13. FAN VOLT ADJUST
• Adjust the fan voltage.
14. INPUT AUTO CALIBRATION
• Perform the auto calibration of input signal level. (For factory inspection purpose)
15. WHITE BALANCE ADJUST
• Adjust the white balance.
16. KEYSTONE CALIBRATION
• Perform the auto keystone calibration.
17. CLOG SENSOR CALIBRATION
• Perform the calibration of clogged sensor circuit.
For Items 10 to 17 of calibration and adjustment, refer to the "SECTION 3 <Adjustment>" for the procedure.
* The display information varies depending on the input signal and
version of the software.
* The word "OK" of Items (TEMP/FAN/MECHANICAL/LAMP)
would be indicated in red if the projector had shutdown due to
abnormality last time.
ȳȥȬȦȀȣȨȥȣȫȀ
ȳȏȮȀȀȤȢȑȒȓȔȕȖȗ
ȭȭȚȀȑȎȐȔȀ
ȳȭȚȀȑȎȐȐ
ȸȧȡȖȐȀ
ȥȭȵȬȡȴȥȀȀȀȍȍȍ
ȀȐȐȐȎȐȐȐȫȨȺȀ
ȧȍȳȡȶȥȤȀ
ȯȫ
ȀȐȐȐȎȐȐȨȺȀ
ȵȍȳȡȶȥȤȀ
ȯȫ
ȀȀȀȀȀȀȀȀȀȀȀȀȍȍȍȍȍȍȍȍȍȍȍȍȍȀȴȥȭȰȀȍȍȍȍȍȍȍȍȍȍȍ
ȴȥȭȰȀ
ȴȥȭȰȀ
ȯȫ
ȩȮȴȫȀ
ȋȒȔȎȑȀ
ȩȮȴȫȀ
ȍȍȍ
ȥȸȳȴȀ
ȋȓȕȎȒȀ
ȥȸȳȴȀ
ȍȍȍ
ȯȰȴȩȀ
ȋȔȒȎȑȀ
ȯȰȴȩȀ
ȍȍȍ
ȦȬȴȲȀ
ȋșȖȎȕȀ
ȦȬȴȲȀ
ȍȍȍ
ȦȬȴȲȀȳȥȮȳȯȲȀȯȦȦȳȥȴ
ȖȗȗȀ
ȖȗȗȀ
ȕȗȗȀ
ȗȒȖȀ
ȕȘȖ
ȀȀȀȀȀȀȀȀȀȀȀȀȍȍȍȍȍȍȍȍȍȍȍȍȍȀȦȡȮȀȍȍȍȍȍȍȍȍȍȍȍȍ
ȩȮȴȫȀ
ȩȮȴȫȀ
ȯȫȀ
ȥȸȳȴȀ
ȯȫ
ȬȡȭȰȀ
ȯȫ
ȀȀȀȀȀȀȀȀȀȀȀȀȍȍȍȍȍȍȍȍȍȀȭȥȣȨȡȮȩȣȡȬȀȍȍȍȍȍȍȍȍȍ
ȩȲȩȳȀ
ȩȲȩȳȀ
ȯȫ
ȀȀȀȀȀȀȀȀȀȀȀȀȍȍȍȍȍȍȍȍȍȍȍȍȍȀȬȡȭȰȀȍȍȍȍȍȍȍȍȍȍȍ
ȬȡȭȰȀ
ȬȡȭȰȀ
ȯȫȀ
ȔȐȐȐȨȀ
ȯȫ
ȭȥȭȯȲȹȀ
ȯȫ
ȀȀȀȀȀȀȀȀȀȀȀȀȍȍȍȍȍȍȍȍȀȵȮȩȴȀȨȩȳȴȯȲȹȀȍȍȍȍȍȍȍȍ
ȴȯȴȡȬȀ
ȴȯȴȡȬȀ
ȑȐȐȐȨȀ
ȲȥȳȥȴȀ
Ȓ
ȀȊȊȊȊȨȕȐȀ
ȊȊȊȊȀ
ȀȀȀȊȊȊȊȨȔȐ
ȀȊȊȊȊȨȐȐȀ
ȊȊȊȊȀ
ȀȀȀȊȊȊȊȨȐȐ
ȀȊȊȊȊȨȐȐȀ
ȊȊȊȊȀ
ȀȀȀȊȊȊȊȨȐȐ
(1)
(13)
(15)
(14)
(16)
(17)
(18)
(19)
(20)
(2)
(3)
(3)
(4)
(5)
(6)
(7)
(8)
(10)
(11)
(12)
(9)
Click on the first or last page to see other PT-VW340Z / PT-VW340ZD / PT-VX410Z / PT-VX410ZD / PT-VX46EA / PT-VX406EA service manuals if exist.