Read Panasonic PT-VW340Z / PT-VW340ZD / PT-VX410Z / PT-VX410ZD / PT-VX46EA / PT-VX406EA Service Manual online
INF-11
SECTION 1 SERVICE INFORMATION
1. FREEZE MESSAGE
• Setting the display of on-screen message "FREEZE"
- ON : Display "FREEZE" message in the freeze mode.
- OFF : Not display "FREEZE" message in the freeze mode.
2. FAN FULL MODE
• Setting the mode of cooling fan motor to the maximum.
- ON : Fixed high speed cooling mode
- OFF : Normal mode (Spinning speed changes depending on the surrounding temperature)
* It sets OFF at the normal.
* The highland mode is not available if it sets ON.
3. VGA60/480p
• Setting the switching mode of RGB input signal
- AUTO : Select VGA60 or 480p of RGB input signal automatically
- 480p : Select 480p mode forcedly.
- VGA60 : Select VGA60 mode forcedly.
4. EMULATE
• Setting the serial command format when using other model's serial control commands.
-DEFAULT: Standard(VX410 series)
-D3500
-D4000
-D/W5k series
-D/W/Z6k series
-L730 series
-L780 series
-L735 series
-L785 series
-F/W series
-LZ370
-LB/W series
-VX500 series
-EZ570 series
-VW431D
-D3500
-D4000
-D/W5k series
-D/W/Z6k series
-L730 series
-L780 series
-L735 series
-L785 series
-F/W series
-LZ370
-LB/W series
-VX500 series
-EZ570 series
-VW431D
-MODE_HI: other company
-MODE_NE: other company
-MODE_EP: other company
-MODE_SA: other company
-MODE_SH: other company
-MODE_MI: other company
-MODE_SO: other company
-MODE_IN: other company
-OTHER:other models
-MODE_NE: other company
-MODE_EP: other company
-MODE_SA: other company
-MODE_SH: other company
-MODE_MI: other company
-MODE_SO: other company
-MODE_IN: other company
-OTHER:other models
* Software of sub-microprocessor cannot be updated when the MODE_** (other company) or OTHER is selected in the EMU-
LATE menu.
5. BAUD RATE
• Setting the baud rate of RS232C communication
- 9600 / -19200 / -38400 / - 57600 / -115200
* The using baud rate will be set when the OTHER is selected in the EMULATE menu. (Use 9600 in normal)
6. VERSION
* The version no. of command will be displayed when the MODE_** (other company) or OTHER is selected in the EMULATE
menu.
7. INPUT SELECT
* The input select command will be assigned when the MODE_IN is selected in the EMULATE menu.
Click on the first or last page to see other PT-VW340Z / PT-VW340ZD / PT-VX410Z / PT-VX410ZD / PT-VX46EA / PT-VX406EA service manuals if exist.