Read Panasonic PT-RZ21KE / PT-RS20K Service Manual online
INF-10
SECTION 1 SERVICE INFORMATION
< RZ21K / RS20K >
3. Service Mode
This projector has Service Mode in addition to standard on-screen menus (User Mode).
This mode enables some menu settings for the service operation.
3. 1. Setting to Service Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu on the
screen.
2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.
3. Input the password "1565" by remote controller and press the [ENTER] button.
4. Press the [MENU] button. "SERVICE MODE" (MAIN MENU) will be displayed.
3. 2. Resetting to User Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu.
2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.
3. Input the password "0000" by remote controller and press the [ENTER] button.
4. Press the [MENU] button. "USER MODE" (MAIN MENU) will be displayed.
3. 3. Functions of Service Mode
3. 3. 1. EXTRA OPTION
"EXTRA OPTION" is added to the bottom of the main menu.
SERVICE PASSWORD
INPUT
SET
****
ENTER
0
～
9
SERVICE PASSWORD
SERVICE MODE
RETURN
MENU
SERVICE PASSWORD
INPUT
SET
****
ENTER
0
～
9
SERVICE PASSWORD
USER MODE
RETURN
MENU
• Functions and display varies according to a version of the main microprocessor firmware.
EXTRA OPTION
DYNAMIC GAMMA MODE
3DCMS
SHUTTER KEEP
ON
ON
ON
OFF
OFF
OFF
0SEC.
SELF CHECK
POWER OFF MESSAGE
ERROR OSD
ELECTRICAL CONVERGENCE
MECHANICAL CONVERGENCE
MODEL
POWER OFF MESSAGE
ERROR OSD
ELECTRICAL CONVERGENCE
MECHANICAL CONVERGENCE
MODEL
INDICATOR SETTING
LIGHT ADJUST
COMMAND CONTROL TIMEOUT
PHOTO SENSOR CALIBRATION
PHOTO SENSOR CALIBRATION
MENU SELECT
SUB MENU
ENTER
1
8
7
5
3
4
4
6
9
2
11
12
10
Click on the first or last page to see other PT-RZ21KE / PT-RS20K service manuals if exist.