PT-RCQ10, PT-RCQ80 (serv.man3) - Panasonic Projector Service Manual (repair manual). Page 25

INF-13

    • Setting of the DYNAMIC GAMMA circuit operation.

    - ON : Enable the Dynamic gamma function. (Default setting)

    - OFF : Disable the Dynamic gamma function.

  • Setting of the 3D Color Management System circuit operation.

    - ON : Enable the 3D Color Management system function. (Default setting)

    - OFF : Disable the 3D Color Management system function.

  • Self-diagnosing information Displays.

① --- Model number
② --- Serial number
------------ Firmware version ------------
③ --- Main microprocessor
④ --- Sub microprocessor
⑤ --- FPGA (FPGA2/FPGA3)
⑥ --- CPLD 
⑦ --- Formatter
⑧ --- Digital Link
⑨ --- LD driver (LD1/LD2)
⑩ --- Power microprocessor
⑪ --- Interface board FPGA

⑫ --- Status of Emulate
------------ DEVICE CHECK ------------
⑬ --- Intake air temperature check (Celsius/Fahrenheit)
⑭ --- DMD temperature check (Celsius/Fahrenheit)
⑮ --- Exhaust air temperature check (Celsius/Fahrenheit)
⑯ --- LD1 temperature check (Celsius)
⑰ --- LD2 temperature check (Celsius)
⑱ --- FPGA temperature check (FPGA2/FPGA3 celsius)
⑲ --- Interface board FPGA temperature check (Celsius)
⑳ --- Power temperature check (NORMAL:OK/HIGH:NG) 
㉑ --- LD1 check (1: normal / 0: abnormal)
㉒ --- LD2 check (1: normal / 0: abnormal)