Read Panasonic PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) Service Manual online
8
PREFACE
<MZ16K/MZ13K/MZ10K>
Chapter 7 Appendix — Specifications
ENGLISH - 235
Operating
environment
Operating
environment
temperature
0 °C (32 °F) to 45 °C (113 °F)
*6
Operating
environment
humidity
10 % to 80 % (no condensation)
Remote
control
Power supply
DC 3 V (AAA/R03/LR03 battery x 2)
Operating range Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight
Weight
102 ] (3.6 ozs.) (including batteries)
Dimensions
Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2012 international standards.
*2 Average value. Weight varies for each product.
*3 When the throw ratio is 2.9:1 or less: Risk group 2
When the throw ratio exceeds 2.9:1: Risk group 3
*4 When the throw ratio is 3.4:1 or less: Risk group 2
When the throw ratio exceeds 3.4:1: Risk group 3
*5 When the throw ratio is 4.6:1 or less: Risk group 2
When the throw ratio exceeds 4.6:1: Risk group 3
*6 When using the projector at an altitude lower than 2 700 m (8 858') above sea level, and the operating environment temperature becomes 35 °C
(95 °F) or higher, the light output may be reduced to protect the projector.
Note
f
The model numbers of accessories and optional accessories are subject to change without prior notice.
r
Connecting terminal
<RGB IN> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
VD
TTL high impedance, automatic positive/negative
polarity compatible
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<DVI-D IN> terminal
1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
<HDMI IN> terminal
1 set, HDMI 19 p, HDCP 2.2 compatible, Deep Color compatible
<SDI IN> terminal
1 set (BNC)
HD-SDI signal
HD-SDI signal
SMPTE ST 292 compliant
3G-SDI signal
SMPTE ST 424, 425-2 compliant
<SERIAL/MULTI PROJECTOR
SYNC IN>/ <SERIAL/MULTI
PROJECTOR SYNC OUT>
terminal
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
<REMOTE 1 IN> terminal
1 set, D-Sub 9 p, for contact control
<REMOTE 2 IN>/ <REMOTE 2
OUT> terminal
M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
<DIGITAL LINK> terminal
1 set, RJ-45, for network and DIGITAL LINK connections (HDBaseT
TM
compliant), PJLink (class 2)
compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible
<LAN> terminal
1 set, RJ-45, for network connection, PJLink (class 2) compatible, 10Base-T/100Base-TX, Art-Net
compatible
<DC OUT> terminal
USB connector (type A) x 1, for power supply (DC 5 V, maximum 2 A)
Click on the first or last page to see other PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) service manuals if exist.