Read Panasonic PT-JX200FBU / PT-JX200FWU / PT-JX200FBE / PT-JX200FWE / PT-JX200FBK / PT-JX200FWK (serv.man2) Service Manual online
ADJ-11
SECTION 3 ADJUSTMENTS
< JX200F >
1. 6. LD unit runtime reset
1. Press the [MENU] button on the remote control to display the main menu on the screen.
2. Select a sub menu "SERVICE PASSWORD" of the main menu "SETUP" and press the [ENTER] button.
3. Enter the password "32451" by remote controller and press the [ENTER] button.
• Projector enters the "TECHNICAL SERVICE MODE".
4. "RESET LIGHT RUNTIME" is added to "EXTRA OPTION", and the number of reset times and the runtime is displayed.
Select the "RESET LIGHT RUNTIME" and press the [ENTER] button.
5. The confirmation screen will be displayed.
Select [OK] and press the [ENTER] button to reset the runtime.
6. After completing the reset, restart the projector and check the runtime with the [STATUS] screen.
Click on the first or last page to see other PT-JX200FBU / PT-JX200FWU / PT-JX200FBE / PT-JX200FWE / PT-JX200FBK / PT-JX200FWK (serv.man2) service manuals if exist.