Read Panasonic PT-JX200FBU / PT-JX200FWU / PT-JX200FBE / PT-JX200FWE / PT-JX200FBK / PT-JX200FWK (serv.man2) Service Manual online
ADJ-14
SECTION 3 ADJUSTMENTS
< JX200F >
3. Select the Model No., then click the [OK] button.
4. Enter the setting information of the projector and click the [Connection Check] button.
• Enter the IP address and Username /Password set on the projector.
• The factory default setting of the user name and password are "admin1", "panasonic".
5. Result of connection check is displayed.
• When "Check : OK" is displayed, click the [OK] button and proceed to the next step.
• If "Check : NG" is displayed, check the setting in step 4.
6. Click the [load] button of "Main" in Select Microcomputer's firmware file.
• This model is updated with a package (main/sub/network) software.
Select [NTN91002/JX200]
Click on the first or last page to see other PT-JX200FBU / PT-JX200FWU / PT-JX200FBE / PT-JX200FWE / PT-JX200FBK / PT-JX200FWK (serv.man2) service manuals if exist.