Read Panasonic PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man5) Other Service Manuals online
SECTION 1 SERVICE INFORMATION
<PT-DZ16K>
4. 2. 3. When Web control administrator rights password is not set (Non-protect mode)
4. 2. 3. 1. Connecting
4. 2. 3. 1. Connecting
1. Obtain the IP address and port number (Initial setting value = 1024) of the projector and request for a connection
to the projector.
You can obtain both the IP address and the port number from the menu screen of the projector.
to the projector.
You can obtain both the IP address and the port number from the menu screen of the projector.
・
: Obtain from the main menu → [NETWORK] → [NETWORK STATUS]
・
: Obtain from the main menu → [NETWORK] → [NETWORK CONTROL] → [COMMAND PORT]
2. Check the response from the projector
・
Response data
Mode: 0 = Non-protect mode
4. 2. 3. 2. Command transmission method
Transmit using the following command formats.
Transmitted data
Received data
IP address
Data section
Port number
1 byte
“NTCONTROL”
Blank
Mode
‘ ’
‘0’
Termination symbol
(CR)
0x0d
0x0d
1 byte
(ASCII string)
9 bytes
0x20
0x30
1 byte
0x30
0x30
(ASCII string)
0x0d
Header
Data section
‘0’
‘0’
Control command
Termination symbol
(CR)
1 byte
1 byte
Undefined length
1 byte
Header
Data section
Control command
0 30
0 30
(ASCII t i )
Termination symbol
(CR)
‘0’
‘0’
0 0d
INF - 17
Error response
“ERR1”
Undefined control command
“ERR2”
Out of parameter range
“ERR3”
Busy state or no-acceptable period
“ERR4”
Timeout or no-acceptable period
“ERR5”
Wrong data length
“ERRA”
Password mismatch
Example: Query Power "QPW"
1. Connects to the projector
IP = 192.168.0.8 port = 1024
2. Receives a response
Response = "NTCONTROL 0" + (CR)
3. Transmits the command
Transmission data = "00QPW" + (CR)
4. Receives a response.
Reception data = "00000" + (CR)
5. Disconnects the connection with the projector.
4. 3. Control commands List
* Please refer to a separate volume "control commands". (Posted to the projector service home page)
0x30
0x30
(ASCII string)
4 bytes
1 byte
Error message
Termination symbol
0x0d
1 byte
1 byte
Undefined length
1 byte
(CR)
0x0d
INF - 17
Click on the first or last page to see other PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man5) service manuals if exist.