Read Panasonic PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man5) Other Service Manuals online
SECTION 1 SERVICE INFORMATION
<PT-DZ16K>
G Replace the G-P.C.Board.
■ Controls of side panel does not respond
G
Check cable between connectors G2 and S1
(No breaking of wire, etc.).
Replace the cable.
G When MAIN POWER is turned ON, the voltage of
connector G2 pin 10 is 3.3V.
■ REMOTE 2 IN does not respond
Cable is connected with JK6005(REMOTE IN2).
G
When POWER is turned ON and OFF by remote
control,
the signal can be detected with IC6011 pins 14 and
18.
G Check and repair IC6011 and the peripheral circuits.
Connect the cables properly.
G Replace the G-P.C.Board.
OK
NG
NG
OK
OK
NG
NG
OK
INF - 38
G
S
G Replace the G-P.C.Board.
The voltage of connector G2 pins 6-8 is approx 3V.
Replace the S-P.C.Board.
OK
NG
OK
INF - 38