Read Panasonic ET-MWP100G Service Manual online
17
10. Multi Window Processor will restart automatically when the update is completed.
Power indicator on the front panel will turn green, reboot is complete.
Power indicator on the front panel will turn green, reboot is complete.
11. Log in to the control software, please check the firmware version from [General] tab in [Settig] tab.
5. 4. Setting restore of Multi Window Processor
1. Connect the Multi Window Processor to the control computer using a RS-232C cable.
2. Turn on the power of Multi Window Processor. (Power indicator will light in green.)
3. After login in the control software, click the [CommData] tab, and type the restore command on the command line.
3. After login in the control software, click the [CommData] tab, and type the restore command on the command line.
* Restore command : [ system.RestoreBackup() ]
Then, the [Send] button is clicked.
4. Please confirm the communication log of [Comm Data] page.
When restore is completed, please reboot the power supply of a Multi Window Processor.
When restore is completed, please reboot the power supply of a Multi Window Processor.
Computer
MWP100
RS-232C cable (Streight)
Communication conditions
for the <RS232> terminal
Click on the first or last page to see other ET-MWP100G service manuals if exist.