Read Panasonic DP-C262 / DP-C322 (serv.man2) Service Manual online
124
DP-C262/322
APR 2005
Ver. 1.1
(31) Remove 2 Screws (X8).
(32) Remove the Developer Cover (5401) by
(32) Remove the Developer Cover (5401) by
releasing 4 latches.
<Replacing the Developer>
Note:
Only if a problem occurs, perform the step below.
If there is no problem, skip to the step (34).
If there is no problem, skip to the step (34).
(33) Turn the Developer Unit upside down over a
suitable waste container or a sheet of paper, and
dump the used Developer and Toner by rotating
the gear counterclockwise.
dump the used Developer and Toner by rotating
the gear counterclockwise.
<Pouring the Developer>
(34) Shake the Developer Bottle a few times to
loosen its contents.
(35) Carefully pour the developer evenly into the
developer unit while turning the Gear as
illustrated. Make sure to empty the bottle.
illustrated. Make sure to empty the bottle.
(36) Reinstall the Developer Cover.
(37) Install the new Developer Unit.
(38) Connect the Developer Harness.
(39) Hook 2 Harness Clamps.
(37) Install the new Developer Unit.
(38) Connect the Developer Harness.
(39) Hook 2 Harness Clamps.
(40) Reinstall the Developer Front Bracket.
Note:
When reinstalling the Developer Cover, exercise
care not to pinch the Harness with the Cover.
care not to pinch the Harness with the Cover.
Click on the first or last page to see other DP-C262 / DP-C322 (serv.man2) service manuals if exist.