DP-C262, DP-C322 (serv.man2) - Panasonic Copying Equipment Service Manual (repair manual)

Order Number: MGCS050101C0

H21

This service information is designed for experienced repair technicians only and is not intended for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service 
or repair the product or products dealt within this service information by anyone else could result in serious injury or death.

2

The contents of this Service Manual and the Specifications are 

subject to change 

without notice. 
Panasonic Communications Co., Ltd. reserves the right to make improvements in 
the product design without reservation and without notice.
Published in Japan.

  Information regarding Lead-Free (PbF) solder:

    Distinction of PbF PCB:

PCBs (manufactured) using lead free solder will have a          mark following 
the PCB part numbers in a label on the PCB.

    Caution:

  Pb free solder has a higher melting point than standard solder; typically 
  the melting point is 50 - 70  F (30 - 40  C) higher. Please use a soldering iron 
  with temperature control and adjust it to 700  20  F (370  10  C). Exercise care 
  while using higher temperature soldering irons, do not heat the PCB for too long 
  to prevent solder splash or damage to the PCB.
  Pb free solder will tend to splash when heated too high (about 1100  F/600  C).
  ECO SOLDER M705 (available from Senju Metal Industry Co., Ltd.: 

             URL: 

3

4