Read Panasonic TX-PR42S10 Service Manual online
23
7.17. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
(glass)
1. Remove the cabinet assy and the plasma panel fastening
screws (
×2 ).
2. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
3. Remove the Rear cover hooks (L, R).
7.18. Remove the S-Board
1. Remove the Cabinet assy. (See section 7.17.)
2. Remove the S-Board shield case.
2. Remove the S-Board shield case.
3. Remove the screws (
×2
) and remove the S-Board
unit.
4. Disconnect the connector (S1).
5. Remove the Power button.
5. Remove the Power button.
Click on the first or last page to see other TX-PR42S10 service manuals if exist.