Read Sharp LL-T1810A (serv.man19) User Guide / Operation Manual online
Low-Refrection TFT color LCD panel
x RGB x 400-line to up to 1280-dot x RGB x 1024-line
Supports VESA specification, PC9800 series and Power Macin-
to the OSD guide function, in addition to the automatic adjustment
Super-V and Anti Glare Low Reflection TFT LCD module
Green, Composite Sync (TTL level: +/-)
To activate the monitor’s Power Management function, both the
video card and the computer must conform to the VESA DPMS
monitor or PC. It transfers information such as degree of resolution
between the monitor and PC. You can use this function if your PC is
DDC compliant and if it is set so that it can detect the Plug & Play
systems. This monitor works with DDC1 and DDC2B.
This button switches the monitor
ON and OFF.
Green light: In use
Orange light: Power saving mode or
This button is used to select menu options when the
OSD Menu is displayed.
These buttons are used to increase or decrease the
value of a selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness
This button is used to pop-up, select and close the
Use this button to switch between input signal terminals.
(INPUT 1 INPUT 2)
openings as this may lead to
overheating inside the monitor
and result in malfunction.
Remove the cover to see the power terminal.
The AC adapter is connected here.
Remove the cover to view the computer
input terminal (INPUT 2) and USB port.
INPUT 2 terminal
A second computer can be connected here.
USB port: Downstream
A USB device can be connected here.
USB port: Upstream
A USB-ready computer or self-powered
USB hub can be connected here.
This is to be connected to the computer's
(i.e. PC etc) analog RGB output terminal.
By connecting a security lock (purchased separately) to the security lock
anchor, the monitor is fixed so that it cannot be transported.
adjust it to a suitable viewing angle.
sure to hold the green section only.
Pressure from hands on the LCD
panel could cause damage.