TX-PR42S10 - Panasonic Plasma Service Manual (repair manual). Page 24

24

6. Remove the screw (

×1 

) and remove the S-Board.

1. Remove the Cabinet assy. (See section 7.17.)
2. Remove the S-Board. (See section 7.18.)
3. Remove the screws (

×5 ).

4. Remove the screws (

×4 ).

5. Remove the Glass holder side (L, R).
6. Remove the screws (

×7 ).

7. Remove the Glass holder top front.
8. Remove the Glass holder bottom front.
9. Remove the Front glass.

1. Remove the Front glass. (See section 7.19.)
2. Remove the screw (

×2 ).

3. Remove the claw (

×1 ).

4. Disconnect the connector (K1) and remove the K-Board

from LED Panel.

1. Place a carton box packed a new plasma panel on the flat

surface of the work bench.

2. Open a box and without taking a new plasma panel;

Attach the C1-Board and the C2-Board, connect the flexi-
ble cables from the plasma panel to the C1-Board and the
C2-Board, and fit the flexible cable holders.

3. Attach the Hanger metals and the Stand brackets to the

new plasma panel.

4. Place the plasma panel on the servicing stand taking hold

of the Hanger metals.

5. Attach the cabinet assy and each P.C.Board and so on, to

the new plasma panel.