Read Panasonic CF-VEB081U Service Manual online
3
■
■
■
■ Cautions for assembling the Cables
1.2.3.
Setting the Main PCB
1. Attach the two Edge Sheet.
2. Connect the three Cables to the two Connectors (CN700,
2. Connect the three Cables to the two Connectors (CN700,
CN701, CN706) of the Main PCB.
3. Fix the Main PCB and the ESD Spring using the four
Screws <N1>. No1 to No4
4. Lock the Core Holder.
Note:
Tighten the Screws in the numbered order (No1 to No4).
Screws <N1>:XTB26+8GFN
Note
Apply the load to attach. 20 to 30N (2.0 to 3.0 Kgf)
*Paste Sheets firmly. 30~40N (3.0~4.0Kgf)
Apply the load to attach. 20 to 30N (2.0 to 3.0 Kgf)
*Paste Sheets firmly. 30~40N (3.0~4.0Kgf)
Match the position and attach.
Avoid catching of the tube
Docking PCB side
Power Cable
Core Spacer
2~3mm
4~5mm
Lock the Cables firmly.
USB/LAN Cable
Clamp/Core
Clamp/Core
Core Spacer
Main P.C.B.
Core Holder
ESD Spring
Connector(CN706)
Connector(CN700)
Connector(CN701)
<N1>
No.2
<N1>
No.4
<N1>
No.1
<N1>
No.3
Edge Sheet
Edge Sheet
Click on the first or last page to see other CF-VEB081U service manuals if exist.