Read Panasonic CF-VEB081U Service Manual online
2
1.2.
Reassembly Instructions
1.2.1.
Setting the USB PCB
1. Attach the two Edge Sheet.
2. Connect the Cable to the Connectors (CN812) of the USB
2. Connect the Cable to the Connectors (CN812) of the USB
PCB.
3. Fix the USB PCB and the ESD Spring using the three
Screws <N1>. No1 to No3
Note:
Tighten the Screws in the numbered order (No1 to No3).
Screw <N1>:XTB26+8GFN
■
■
■
■ Putting the Edge Sheet
1.2.2.
Setting the Docking PCB
1. Connect the Cable to the Connectors (CN800, CN801) of
the Docking PCB.
2. Fix the Docking PCB using the three Screws <N2>.
Screws <N2>:XTB2+5GFN
ESD Spring
USB P.C.B.
Connector(CN812)
<N1>
<N1>
No.2
No.1
<N1>
No.3
Edge Sheet
Edge Sheet
Note
Apply the load to attach. 20 to 30N (2.0 to 3.0 Kgf)
Apply the load to attach. 20 to 30N (2.0 to 3.0 Kgf)
*Paste Sheets firmly. 20 to 30N(2.0 to 3.0Kgf)
Match to the edge of the shell slit ( 0.5).
Match the CN width side to the center ( 0.5).
Match the CN width side to the center ( 0.5).
Fold to the back of
the CN and attach.
the CN and attach.
USB PCB
<N2> <N2>
<N2>
Connector(CN800)
Connector(CN801)
Docking P.C.B.
Click on the first or last page to see other CF-VEB081U service manuals if exist.