KX-UT113RU, KX-UT113RU-B, KX-UT123RU, KX-UT123RU-B (serv.man3) - Panasonic PBX Service Manual (repair manual). Page 18

Read Panasonic KX-UT113RU / KX-UT113RU-B / KX-UT123RU / KX-UT123RU-B (serv.man3) Service Manual online

18
KX-UT113RU/KX-UT113RU-B/KX-UT123RU/KX-UT123RU-B
6 Installation Instructions
6.1.
Connections
This section explains the ports and connectors on the unit.
Connections for AC Adaptor/LAN/PC
CAUTION
Optional AC Adaptor
• Use the following Panasonic AC adaptor.
     - KX-A239CE (PQLV206CE)
• The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the unit and is easily acces-
sible.
When connecting a headset
• Ensure that the headset cord has slack and is not pulled tight during use to prevent damage to the connectors.
• Cords used to connect devices to the EHS jack or headset jack must be less than 3 m in length.
Notice
• It is recommended that you use the following headsets:
- Wired headsets
   Panasonic RP-TCA400 and RP-TCA430
When selecting Ethernet cables (not included)
• Use flexible, high-quality, snagless (without strain relief) cables. Do not use cables with coating that may tear or crack when
bent.
To prevent damage to the cables, use cables that do not protrude from the bottom of the base.
Connect the cables as shown in the following illustration.
• Use a straight CAT 5 (or higher) Ethernet cable (not included) that is 6.5 mm in diameter or less.
Page of 93
Display

Click on the first or last page to see other KX-UT113RU / KX-UT113RU-B / KX-UT123RU / KX-UT123RU-B (serv.man3) service manuals if exist.