Read Panasonic KX-UT113RU / KX-UT113RU-B / KX-UT123RU / KX-UT123RU-B (serv.man3) Service Manual online
20
KX-UT113RU/KX-UT113RU-B/KX-UT123RU/KX-UT123RU-B
7 Test Mode
7.1.
Peer to Peer Test Mode
This is for VoIP communication TEST.
Setting of Unit are required before communication test by Peer to Peer Mode.
Refer to from 7.1.1 Preparation (P.20) to 7.1.2 Connection for Test (P.21) .
Refer to from 7.1.1 Preparation (P.20) to 7.1.2 Connection for Test (P.21) .
7.1.1.
Preparation
Prepared device:
• Unit (for Test phone and Reference phone): Each one
• Ethernet (LAN) cable
• Ethernet (LAN) cable
Set up unit in test mode by key control
1. Connect a power plug (AC adaptor/PoE).
2. Push [2][6][*] within 4 seconds after Ringer Green LED turns off.
3. Release the three keys after beep.
The LCD displays [please wait ...] after a short time.
4. Then the LCD displays [P2P Mode Setting: Normal]. Choose the any mode.
2. Push [2][6][*] within 4 seconds after Ringer Green LED turns off.
3. Release the three keys after beep.
The LCD displays [please wait ...] after a short time.
4. Then the LCD displays [P2P Mode Setting: Normal]. Choose the any mode.
[1][Enter]:TEST mode 1 (IP Address:192.168.0.241)
[2][Enter]:TEST mode 2 (IP Address:192.168.0.240)
[0][Enter]:normal mode
[2][Enter]:TEST mode 2 (IP Address:192.168.0.240)
[0][Enter]:normal mode
5. After that, disconnect and reconnect the power plug.
Click on the first or last page to see other KX-UT113RU / KX-UT113RU-B / KX-UT123RU / KX-UT123RU-B (serv.man3) service manuals if exist.