Read Panasonic KX-UDS124CE Service Manual online
14
KX-UDS124CE
2. Pass the cable through the groove of the SIP-CS in one of the following three ways.
3. Connect the other end of the cable to the switching hub.
6.4.
Connecting an AC Adaptor to a SIP-CS
SIP-CSs comply with the IEEE 802.3af Power-over-Ethernet (PoE) standard. If PoE is available on your network, these SIP-CSs
can receive the necessary power supply from the network through the network cable.
In this case, no AC adaptor is needed for the SIP-CSs.
However, if PoE is not available, you will need to connect an AC adaptor to the SIP-CS.
can receive the necessary power supply from the network through the network cable.
In this case, no AC adaptor is needed for the SIP-CSs.
However, if PoE is not available, you will need to connect an AC adaptor to the SIP-CS.
WARNING
When installing or testing a SIP-CS with an external AC adaptor, the AC adaptor should be plugged into a wall outlet or floor-
mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to
become disconnected.
mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to
become disconnected.
Note
Use only the optional AC adaptor KX-A239 for the SIP-CS. For details about the optional AC adaptor.
1. Connect the AC adaptor cord to the SIP-CS.
Click on the first or last page to see other KX-UDS124CE service manuals if exist.