Read Panasonic KX-NCP1180X Service Manual online
7
KX-NCP1180X
4.2.
Circuit Operation
4.2.1.
Description of Control System Circuits
4.2.1.1.
Reset
On startup, releasing the ASIC reset is executed by EC_nRST through MPR.
After releasing the ASIC, the local reset signal should be sent to CODEC by releasing the soft rest from MPR, and CODEC fac-
tor should be downloaded from MPR.
After releasing the ASIC, the local reset signal should be sent to CODEC by releasing the soft rest from MPR, and CODEC fac-
tor should be downloaded from MPR.
• LED operational state display LED (2 colors)
Red ON: Fault (includes RESET)
Green ON: INS (line free)
Green flash (60/sec): INS (line busy)
Red flash (60/sec): OUS
OFF: the power section failure
Green ON: INS (line free)
Green flash (60/sec): INS (line busy)
Red flash (60/sec): OUS
OFF: the power section failure
4.2.1.2.
Local Highway Interface
Packs 2.048, 4.096, 8.192 MHz highway (Max.64 timeslot). (voice communication bus in the circuit board)
The PCM data of arbitrary streams 0-15 (128 timeslot / 1 stream) on the CT bus can switch to the arbitrary local highway (64
timeslot) by the local TSW.
The timeslot configuration example of the local highway is shown below.
The PCM data of arbitrary streams 0-15 (128 timeslot / 1 stream) on the CT bus can switch to the arbitrary local highway (64
timeslot) by the local TSW.
The timeslot configuration example of the local highway is shown below.
Click on the first or last page to see other KX-NCP1180X service manuals if exist.