Read Panasonic UE-608040 Service Manual online
14
3.5.
Confirming the Operation of the Wireless Kit
Follow the steps below to confirm that the Wireless Kit is operating properly after installation.
Action
Checkpoint
Operation
Measure
1
Turn on the power switch of
the elite Panaboard.
The Wireless LED is blinking (about once
per second).
per second).
The Link LED is dark.
(Normal operation)
The Wireless LED blinks every 0.2
seconds.
seconds.
The device server's internal wireless
module is not being recognized. The
Device Server must be replaced.
module is not being recognized. The
Device Server must be replaced.
The Wireless LED is dark.
Reset the Wireless Kit's settings to its
factory defaults. (See 3.7.7 "Returning
Settings to the Factory Default".)
factory defaults. (See 3.7.7 "Returning
Settings to the Factory Default".)
None of the LEDs light up, or blink.
Check the power cable of the Wireless Kit,
and the power switch and power cord of
the elite Panaboard.(See Step 4 of Sec.
3.4.)
and the power switch and power cord of
the elite Panaboard.(See Step 4 of Sec.
3.4.)
Click on the first or last page to see other UE-608040 service manuals if exist.