Read Panasonic UE-608040 Service Manual online
13
7. Insert the USB cable and power cable into the Cord
Keepers (6).
Keepers (6).
8. Loosen the screw found on the left side of the elite Panaboard,
rotate the DC+5V protective cap 180 degrees, and loosely
re-tighten the screw.
rotate the DC+5V protective cap 180 degrees, and loosely
re-tighten the screw.
9. Connect the USB cable and Power Cable (3) to the elite
Panaboard.
Panaboard.
10. As shown in the illustration in step 9, determine where you
will fasten the USB cable bundled by the USB Cord Tie (5),
and then attach the Hook Fastener (7) to the back of the elite
Panaboard, and fasten the bundled USB cable.
will fasten the USB cable bundled by the USB Cord Tie (5),
and then attach the Hook Fastener (7) to the back of the elite
Panaboard, and fasten the bundled USB cable.
Note:
If you are installing the elite Panaboard on a wall, you
do not need to attach the hook fastener. You can put
the cable between the elite Panaboard and the wall.
If you are installing the elite Panaboard on a wall, you
do not need to attach the hook fastener. You can put
the cable between the elite Panaboard and the wall.
Click on the first or last page to see other UE-608040 service manuals if exist.