UB-T580, UB-T580W (serv.man5) - Panasonic Other Service Manuals Service Manual Supplement (repair manual). Page 7

Read Panasonic UB-T580 / UB-T580W (serv.man5) Service Manual Supplement online

7
3.2.
"Section 9.2 Error Message on PC"
  Note: *
Disassembling the unit will be required to remove the USB cable from the unit and/or reassemble it. 
Symptom
Possible Cause
Check Point
1. "elite Panaboard
    could not be found. 
    Confirm all
    connections."
The connection between elite Panaboard
and PC is not proper.
*1. Check the connection between the elite Panaboard and
     PC.
2. Plug the USB cable to another USB interface on the PC.
The USB cable from the elite Panaboard
is connected to PC via a USB Hub.
1. Plug the USB Cable to the PC, directly.
The USB cable has a failure.
*1. Replace the USB cable.
CONTROL Board has a failure.
1. Replace the CONTROL Board.
 (Note: For details on how to replace the
 board, refer to "SECTION 15 ADJUSTMENT".)
2. "elite Panaboard was
    disconnected."
The connection between elite Panaboard
and PC is not proper.
*1. Check the connection between the elite Panaboard and
     PC.
2. Plug the USB cable to another USB interface on the PC.
The USB cable from the elite Panaboard
is connected to PC via a USB Hub.
1. Plug the USB Cable to the PC, directly.
The USB cable has a failure.
*1. Replace the USB cable.
3. “A problem is
occurring concerning
the operation of the
elite Panaboard.
Check if there are any
magnets or other
obstructing objects on
the surface or frame of
the screen board.”
Magnets or similar objects have been
attached to the Screen Board.
Remove the magnets or other similar objects from the
Screen Board.
Page of 27
Display

Click on the first or last page to see other UB-T580 / UB-T580W (serv.man5) service manuals if exist.

Random: