Read Panasonic UB-5335 / UB-5835 (serv.man2) Service Manual online
17
4.4.2.3.
About Screws and Bolts to be Used
• Be sure to use anchors and bolts which conform to the standard.
• The embedded depth of the anchor must be the manufacturer recommended values.
• When the anchor is the shape of male screw, use the M6 bolt.
• The length of the M6 bolt fitting length of 9 mm or more must be secured. (See figure below.)
• The embedded depth of the anchor must be the manufacturer recommended values.
• When the anchor is the shape of male screw, use the M6 bolt.
• The length of the M6 bolt fitting length of 9 mm or more must be secured. (See figure below.)
• Check that the screw is securely tightened so it does not touch the bottom of the M6 bolt anchor, etc.
• Recommended tightening torque: 5.2 N m (53 kgf cm)
• Recommended tightening torque: 5.2 N m (53 kgf cm)
Click on the first or last page to see other UB-5335 / UB-5835 (serv.man2) service manuals if exist.