Read Panasonic KV-S8147 / KV-S8127 / KV-S8150 / KV-S8130 / KV-S8120 Service Manual online
96
* USB ID
1.Click “USB ID” on the adjust menu.
2. Click “Set” on the “USB ID” dialog box to store a new ID
2. Click “Set” on the “USB ID” dialog box to store a new ID
number for a new replaced CONTROL Board.
3. Click “Close” to return to the adjust menu.
—
*This setting is available only
for a new replaced
CONTROL Board.
CONTROL Board.
Feed speed
1.Click “Feed speed” on the adjust menu.
2. Change the parameter (%: 10 to 100).
3. Click “OK” to renew the setting, and to return to the adjust
2. Change the parameter (%: 10 to 100).
3. Click “OK” to renew the setting, and to return to the adjust
menu.
Note
Note
1. Reducing the Feed Speed to slow may reduce the
number of paper-jams or double-feeds.
2. Setting this parameter to too low may cause a
paper-feed problem. After changing the parameter,
make sure to perform the scanning test, and to confirm
that paper-jams do not occur.
make sure to perform the scanning test, and to confirm
that paper-jams do not occur.
100%
Sensor sensitive
level
level
1.Click “Sensor sensitive level” on the adjust menu.
Note
The adjustment is done for all the sensors below at a
time.
So be sure to clean before adjusting and remove dust
thoroughly from the sensors and reflectors at the
opposite side with a cotton swab.
*If dust remains on them, the adjustment is not done
time.
So be sure to clean before adjusting and remove dust
thoroughly from the sensors and reflectors at the
opposite side with a cotton swab.
*If dust remains on them, the adjustment is not done
properly and the paper detection may not be able to
work.
work.
2. Click “Adjust” on the “Sensor sensitive level” dialog box.
Check each Sensor sensitive level (LED Current) on the
“Sensor sensitive level” dialog box.
“Sensor sensitive level” dialog box.
3. Click “Close” to return to the adjust menu.
—
LED Current normal value :
2-250
2-250
Item
Operation
Default
Remarks
Click on the first or last page to see other KV-S8147 / KV-S8127 / KV-S8150 / KV-S8130 / KV-S8120 service manuals if exist.