Read Panasonic KV-S8147 / KV-S8127 / KV-S8150 / KV-S8130 / KV-S8120 Service Manual online
94
10.3.8.
Adjustment
Item
Operation
Default
Remarks
Shading
1.Click “Shading” on the adjust menu.
2.Check the resolution ( 300dpi, 600dpi) and click “OK”.
3.Clean the conveyor, rollers, Scanning Glass (F) and (B)
2.Check the resolution ( 300dpi, 600dpi) and click “OK”.
3.Clean the conveyor, rollers, Scanning Glass (F) and (B)
according to the message on the display.
And click “OK”.
And click “OK”.
4. Set Shading Sheet (Part No.: PJXC0330Z-J) on the Feed Tray
in landscape orientation.
5. And click “OK” to scan the Shading Sheet.
6. After “Finished Adjusting” message, click “OK” to return to
6. After “Finished Adjusting” message, click “OK” to return to
the adjust menu.
—
Until this process is
completed, don't stop the
process by opening any doors
or turning off the scanner.
completed, don't stop the
process by opening any doors
or turning off the scanner.
Shading data
1.Click “Shading data” on the adjust menu.
2. Click “Get Shading Data” on the Shading Data.
3. Save it to selected folder.
4. Click “OK” to return to the adjust menu.
2. Click “Get Shading Data” on the Shading Data.
3. Save it to selected folder.
4. Click “OK” to return to the adjust menu.
—
This data file is used for
analysis.
analysis.
All position
1.Set 2 pcs of test chart A (Part No.: PBQX90095Z-J) on the
Feed Tray in portrait orientation.
And set 1 pcs of test chart A on the Flatbed.
And set 1 pcs of test chart A on the Flatbed.
2. Click “All position” on the adjust menu to execute scanning
position and length adjustment.
3. Check the result.
4. Click “OK” to return to the adjust menu.
4. Click “OK” to return to the adjust menu.
—
Set 2 pcs of test chart A on
the Feed Tray in order.
1st page: Front side
2nd page: Back side
the Feed Tray in order.
1st page: Front side
2nd page: Back side
Individual position 1.Adjust Automatically.
a.Set test chart A (Part No.: PBQX90095Z-J) on the Feed Tray
in portrait orientation.
b.Click “Individual position” on the adjust menu.
c.Click one of 6 “Adjust Automatically” buttons on the
c.Click one of 6 “Adjust Automatically” buttons on the
“Individual position” dialog box to execute the adjustment.
d.Check the result.
e.Click “OK” to finish the adjustment.
f.Click “OK” to return to the adjust menu.
e.Click “OK” to finish the adjustment.
f.Click “OK” to return to the adjust menu.
2. Adjust Manually.
a.Click “Individual position” on the adjust menu.
b.Change the parameters (mm, %) on the “Individual
b.Change the parameters (mm, %) on the “Individual
position” dialog box as required. (Refer to Remarks.)
c.Click “OK” to renew the setting, and to return to the adjust
menu.
—
1.Adjust Automatically
automatic adjustments items
a.Length
b.Paper End Position
c. Front V. Position
d. Front h. Position
e. Back V. Position
f. Back H. Position
a.Length
b.Paper End Position
c. Front V. Position
d. Front h. Position
e. Back V. Position
f. Back H. Position
2.Adjust Manually
(Length)
+: Increasing the value
+: Increasing the value
allows the scanned
image to extend
vertically.
image to extend
vertically.
(Paper End Position)
+: On the LC (Length
+: On the LC (Length
Control) mode,
increasing the value
allows the paper-end
timing to be earlier.
increasing the value
allows the paper-end
timing to be earlier.
(Vertical Position)
+: Increasing the value
+: Increasing the value
shifts the scanned image
position downward.
position downward.
(Horizontal Position)
+: Increasing the value
+: Increasing the value
shifts the scanned image
position to the right.
position to the right.
Note
If the appropriate
scanning position
cannot be obtained by
any of the manual
adjustments, check CIS
installation.
scanning position
cannot be obtained by
any of the manual
adjustments, check CIS
installation.
Click on the first or last page to see other KV-S8147 / KV-S8127 / KV-S8150 / KV-S8130 / KV-S8120 service manuals if exist.