Read Panasonic KV-S8147 / KV-S8127 / KV-S8150 / KV-S8130 / KV-S8120 Service Manual online
95
Double feed
1.Adjust Automatically.
a.Set the Shading Sheet (Part No.: PJXC0330Z-J) on the
Feed Tray in landscape orientation, sliding the Document
Guides so that they match the document width.
Guides so that they match the document width.
b.Click “Double feed” in the “Adjust” section on the adjust
menu.
c.Click “Adjust Automatically” on the “Double feed detec-
tor” dialog box to adjust the double feed sensitivity.
d.Check the result.
e.Click “OK” finish the adjustment.
f.Click “OK” on the “Double feed detector” dialog box to
e.Click “OK” finish the adjustment.
f.Click “OK” on the “Double feed detector” dialog box to
return to the adjust menu.
—
Bent paper sensor 1. Click “Bent paper sensor” on the adjust menu.
2. Set the hopper position to “750 sheets” by click the “Down”
key sometimes on scanner's panel.
3. Set the Shading Sheet (Part No.: PJXC0330Z-J) on the Feed
Tray in landscape orientation and lift the rear end of the shading
sheet in order to covers all Bent paper sensors.
sheet in order to covers all Bent paper sensors.
4. Click “Adjust Automatically” to adjust the sensor level.
(Confirm all of the sensor status is “ON”.)
5. Click “OK” to return to the adjust menu.
—
Item
Operation
Default
Remarks
Send Level
Good result
(Peak Level)
(Peak Level)
Level: 0 to 255 700 or more
Shading Sheet
Click on the first or last page to see other KV-S8147 / KV-S8127 / KV-S8150 / KV-S8130 / KV-S8120 service manuals if exist.