Read Panasonic KV-S7075C (serv.man2) Service Manual online
123
F60 (Front-side gain
adjustment error)
adjustment error)
50 00 00 00 1. ADF Glass (F) is dirty.
Clean the glass surface. (See 7.2.)
2. CIS (F) LED does not light.
1. Execute “CIS Level” test in Sec. 9.3.6
to check the peak level after turning the
Reference Plate (F) to white.
2. Check whether the CIS (F) LED lights
during CIS Level test.
3. Check the following connections and
soldering condition on each connector:
a. CIS (F) to CN3001 and CN3002
(CIS (F) RELAY Board)
b. CN3004 (CIS (F) RELAY Board)
to CN2009 (CENTER Board)
4. Check the LED control circuits on the
CENTER Board.
to check the peak level after turning the
Reference Plate (F) to white.
2. Check whether the CIS (F) LED lights
during CIS Level test.
3. Check the following connections and
soldering condition on each connector:
a. CIS (F) to CN3001 and CN3002
(CIS (F) RELAY Board)
b. CN3004 (CIS (F) RELAY Board)
to CN2009 (CENTER Board)
4. Check the LED control circuits on the
CENTER Board.
→ Q2010,Q2012,Q2016,Q2018,Q2022,
Q2024 and their surrounding parts.
5. Replace faulty parts or boards.
5. Replace faulty parts or boards.
3. Pixel data from CIS (F) or
image processing circuit
has some problems
image processing circuit
has some problems
1. Check the following connections and
soldering condition on each connector:
a. CN3004 and CN3005 (CIS (F)
RELAY Board) to CN2008 and
CN2009 (CENTER Board)
2. Check the following power supply for
the CIS (F) RELAY Board:
soldering condition on each connector:
a. CN3004 and CN3005 (CIS (F)
RELAY Board) to CN2008 and
CN2009 (CENTER Board)
2. Check the following power supply for
the CIS (F) RELAY Board:
→ CN3004-7th or 8th pin: 12 V
→ CN3004-9th or 10th pin: 5 V
3. Check the soldering condition of the
IC2009 to IC2012, and their
surrounding parts on the CENTER
Board.
4. Replace faulty parts or boards.
IC2009 to IC2012, and their
surrounding parts on the CENTER
Board.
4. Replace faulty parts or boards.
F61 (Front-side
black level error)
black level error)
51 00 00 00 1. Pixel data from CIS (F) or
image processing circuit
has some problems.
has some problems.
1. Execute “CIS Level” test in Sec.9.3.6
to check the peak level.
2. Replace the CIS (F) or CENTER
Board.
to check the peak level.
2. Replace the CIS (F) or CENTER
Board.
Error Code
Possible Cause
Check Point
Remarks
Classification
Code
ST1 ST2 ST3 ST4
Click on the first or last page to see other KV-S7075C (serv.man2) service manuals if exist.