Read Panasonic KV-S4065CL / KV-S4065CW / KV-S4085CL / KV-S4085CW Service Manual Supplement online
14
4.3.2.
“Section 9.3.6 Test”
Item
Operation
Default
Remarks
Feed
1. Set documents on the Hopper Tray.
2. Click “Feed” on the main menu.
2. Click “Feed” on the main menu.
3. Set “Test Mode” and “Test Condition” depending on each
scanning condition.
Note:
scanning condition.
Note:
Operation “Imprinter” is available only when the
optional Imprinter is installed.
optional Imprinter is installed.
4. Click “START” on the “Feed” dialog box to start feeding
documents.
documents.
5. Click “STOP” on the “Feed” dialog box to stop the test.
6. Click “Close” to return to the main menu.
6. Click “Close” to return to the main menu.
—
Slip Detect
Sensor
Sensor
1. Click “Slip Detect Sensor” on the main menu.
2. Confirm that manually rotating the *Slip Detect Sensor
Roller (1) allows the counter value on the display to count up
or reset to zero.
3. And also confirm that manually rotating the *Slip Detect
Sensor Roller (2) allows the counter value on the display to
increase.
4. Click “Close” to return to the main menu.
Roller (1) allows the counter value on the display to count up
or reset to zero.
3. And also confirm that manually rotating the *Slip Detect
Sensor Roller (2) allows the counter value on the display to
increase.
4. Click “Close” to return to the main menu.
—
*: Slip Detect Sensor Roller’s
Position
Position
→ See 6.5.
Sleep Mode
1. Click “Sleep Mode” on the main menu.
2. Select “Sleep” or "Standby" on the “Sleep Mode”
dialog box.
3. Click “START” on the “Sleep Mode” dialog box to enter
the Sleep (or Standby) mode.
4. When selecting the Sleep mode, click “STOP” to return
from the Sleep mode to the previous status (normally
Ready Mode).
When selecting the Standby mode, push any one of the
keys on the scanner's Control Panel for more than
1 second to restart the scanner.
5.
dialog box.
3. Click “START” on the “Sleep Mode” dialog box to enter
the Sleep (or Standby) mode.
4. When selecting the Sleep mode, click “STOP” to return
from the Sleep mode to the previous status (normally
Ready Mode).
When selecting the Standby mode, push any one of the
keys on the scanner's Control Panel for more than
1 second to restart the scanner.
5.
Click “Close” to return to the main menu.
—
Click on the first or last page to see other KV-S4065CL / KV-S4065CW / KV-S4085CL / KV-S4085CW service manuals if exist.